Anchor
TRILOBITE HYDRO ANCHOR
The Trilobite Hydro Anchor is a hydraulically-set, retrievable, tubing anchor / catcher featuring D&L’s patent pending slip / cone design. The Trilobite Hydro Anchor utilizes heat-treated steel alloy double-acting slips for maximum holding power in tension or compression. The fully enclosed slips allow for maximum bypass area around the outside of the anchor while maintaining a full open ID through the tubing. This versatile design can be used to route multiple capillary lines or monitoring cables past the anchor and to provide a gas/debris bypass area around the three slips.
The Trilobite Hydro Anchor catcher prevents movement of the tubing during pumping strokes and holds it stationary if it should part. This increases pump efficiency, reduces rod and tubing wear, and keeps tubing and rods from falling into the well in case of a part.
Features:
- Patent pending, fully enclosed slip/cone design
- Maximum holding power in tension or compression
- Large flow area around tool
- Full open ID
- Shear release
Casing |
Recommended Hole Size IN |
Max OD IN |
Reduced OD IN |
Tool ID IN |
Thread Connections Box Up / Pin Down |
|
---|---|---|---|---|---|---|
Size IN |
Weight LBS/FT |
|||||
5-1/2 | 14.0 - 23.0 | 4.670 - 5.040 | 4.50 | 3.67 | 2.44 | 2-7/8 EUE |
7 | 17.0 - 26.0 | 6.276 - 6.538 | 6.000 | 4.50 | 3.00 | 3-1/2 EUE |